Kulkoni, Inc. 1-800-231-2357

Kulkoni, Inc. v921 WARNING: NEVER EXCEED WORKING LOAD LIMIT Page 74 FORGED STEEL CLEVIS Clevis Pin Headless Pin Size Number Max Tap Size in Inches Min Tap Size in Inches Max W.L.L. in Pounds* All Dimensions in Inches Max Pin Diameter in Inches Min Pin Diameter in Inches Weight per 100 A B (Max) C D E F 2** 5/8 3/8 see table 3.3/4 13/16 1.7/16 1 5/8 5/16 3/4 1/2 77 2.1/2** 7/8 5/8 see table 4 1.9/16 2.1/2 1.1/4 7/8 5/16 1.1/2 3/4 250 3** 1.3/8 7/8 see table 5 1.13/16 3 1.1/2 1.3/8 1/2 1.3/4 1 400 3.1/2 1.1/2 1.1/8 see table 6 2.1/16 3.1/2 1.3/4 1.1/2 1/2 2 1.1/4 600 4 1.3/4 1.3/8 see table 6 2.5/16 4 2 1.3/4 1/2 2.1/4 1.1/4 800 5 2 1.1/2 see table 7 2.9/16 5 2.5 2.1/4 5/8 2.1/2 1.3/8 1700 **#2, #2.1/2, #3 Clevises are available in Type 316 Stainless Steel. According to Manufacturers Standardization Society SP 58 (Type 14). Forged and heat treated to ASTM-A-668. Maximum Allowable Working Load Limits are based on Tap Sizes Listed in Table. Caution: DO NOT DEVIATE from range of pin sizes listed for each clevis size. All W.L.L. are inclusive of the range of pin diameters listed for each clevis size. Grip tolerance is +1/8", -1/16". When ordering, please specify finish (self colored or galvanized), size no., tap size (oversized or standard) & pitch, and grip, pin type & size. Tap Size in Inches Maximum Allowable Working Load Limit @ 650° F in Pounds 3/8 1,250 1/2 1,900 5/8 3,500 3/4 5,300 7/8 7,500 1 9,700 1.1/8 12,200 1.1/4 15,000 1.3/8 18,500 1.1/2 22,500 1.3/4 27,500 2 37,000 Read important warnings and information on pages 2 - 9 and page 33.