Kulkoni, Inc. 1-800-231-2357

Kulkoni, Inc. v921 WARNING: NEVER EXCEED WORKING LOAD LIMIT Page 62 TURNBUCKLE BODIES / STUB END TB’S Size in Inches Working Load Limit in Pounds Approximate Weight Each Body Only in Pounds Approximate Weight Each Stub End in Pounds Dimensions in Inches Dia. (A) x Take-Up (B ) C D E F* 3/8 x 6 1,200 0.3 0.7 7.13 0.56 4.44 16.00 1/2 x 6 2,200 0.6 1.4 7.50 0.75 4.25 16.00 1/2 x 9 2,200 0.8 1.7 10.50 0.75 4.25 19.00 1/2 x 12 2,200 1.0 1.8 13.50 0.75 4.25 22.00 5/8 x 6 3,500 1.0 2.0 7.88 0.94 4.06 16.00 5/8 x 9 3,500 1.2 2.5 10.88 0.94 4.06 19.00 5/8 x 12 3,500 1.4 3.1 13.88 0.94 4.06 22.00 3/4 x 6 5,200 1.2 3.3 8.25 1.13 4.38 17.00 3/4 x 9 5,200 1.6 4.0 11.25 1.13 4.38 20.00 3/4 x 12 5,200 2.1 4.8 14.25 1.13 4.38 23.00 3/4 x 18 5,200 3.2 5.8 20.25 1.13 4.38 29.00 7/8 x 6 7,200 1.8 4.5 8.63 1.31 4.69 18.00 7/8 x 12 7,200 2.7 6.4 14.63 1.31 4.69 24.00 7/8 x 18 7,200 3.8 --- 20.63 1.31 --- --- 1 x 6 10,000 2.5 6.3 9.00 1.50 5.00 19.00 1 x 12 10,000 4.2 8.9 15.00 1.50 5.00 25.00 1 x 18 10,000 7.0 11.4 21.00 1.50 5.00 31.00 1 x 24 10,000 7.4 --- 27.00 1.50 --- --- 1.1/8 x 6 12,400 5.0 --- 9.13 1.56 --- --- 1.1/8 x 12 12,400 5.4 --- 15.13 1.56 --- --- 1.1/4 x 6 15,200 5.0 10.2 9.13 1.56 5.44 20.00 1.1/4 x 12 15,200 5.4 13.6 15.13 1.56 5.44 26.00 1.1/4 x 18 15,200 8.0 --- 21.10 1.56 --- --- 1.1/4 x 24 15,200 10.2 --- 27.13 1.56 --- --- 1.3/8 x 6 18,000 6.0 13.9 9.75 1.88 5.38 20.50 1.1/2 x 6 21,400 5.7 15.1 9.75 1.88 5.38 20.50 1.1/2 x 12 21,400 8.5 20.5 15.75 1.88 5.38 26.50 1.1/2 x 18 21,400 11.0 --- 21.75 1.88 --- --- 1.1/2 x 24 21,400 13.7 --- 27.75 1.88 --- --- 1.5/8 x 6 25,000 8.2 --- 10.38 2.19 --- --- 1.3/4 x 6 28,000 10.3 22.5 10.38 2.19 5.80 22.00 2 x 6 37,000 14.2 34.0 11.00 2.50 6.00 23.00 2 x 24 37,000 30.0 --- 29.00 2.50 --- --- 2.1/2 x 6 60,000 33.0 68.0 13.50 3.75 6.25 26.00 * Closed position Meets the performance requirements of ASTM F 1145. Self-colored finish. Some bodies available hot-galvanized. Drop forged. STUB END BODY ONLY Read important warnings and information on pages 2 - 9 and page 33.