Kulkoni, Inc. 1-800-231-2357

Kulkoni, Inc. v921 WARNING: NEVER EXCEED WORKING LOAD LIMIT Page 60 T316 FORGED and CAST 316 CF8M STAINLESS Size in Inches Working Load Limit in Pounds Average Overall Length in Inches with Ends in Closed Position Approximate Weight Each in Pounds Eye & Eye Jaw & Eye Jaw & Jaw 1/4 x 4 500 ** 8.75 0.30 0.30 0.40 5/16 x 4.1/2 800 ** 9.56 0.50 0.53 0.58 3/8 x 6 1,200 ** 12.00 0.75 0.82 0.93 1/2 x 6 2,200 ** 13.50 1.50 1.62 1.68 5/8 x 6 3,500 ** 15.50 2.63 2.69 2.82 3/4 x 6 5,200 ** 17.00 3.75 4.25 4.68 1 x 6* 8,000 ** 20.63 10.75 11.10 11.80 1 x 12* 8,000 ** 26.63 11.25 12.00 12.88 * 1” turnbuckles available in cast only. ** All cast stainless steel turnbuckles are 4:1 design factor. GALVANIZED JAMNUTS FOR GALVANIZED TURNBUCKLES LEFT or RIGHT THREAD Size in Inches Thread Approximate Weight Each in Pounds NC Threads per Inch Width Across Flat (A) in Inches 3/8 Left or Right 0.01 16 0.56 1/2 Left or Right 0.03 13 0.75 5/8 Left or Right 0.05 11 0.94 3/4 Left or Right 0.08 10 1.13 7/8 Left or Right 0.11 9 1.31 1 Left or Right 0.18 8 1.50 1.1/4 Left or Right 0.37 7 1.81 1.1/2 Left or Right 0.60 6 2.19 1.3/4 Left or Right 1.02 5 2.56 2 Left or Right 2.25 4.1/2 2.94 2.1/2 Left or Right 3.13 4 3.75 2.3/4 Left or Right 3.30 4 4.13 Sold only in pairs with turnbuckles; 1 each R.H., 1 each L.H., galvanized. Do not over tighten locknuts during installation. STAINLESS TURNBUCKLES Read important warnings and information on pages 2 - 9 and page 33.