Kulkoni, Inc. 1-800-231-2357

Kulkoni, Inc. v921 WARNING: NEVER EXCEED WORKING LOAD LIMIT Page 58 STAINLESS STEEL BOLT TYPE ANCHOR SHACKLES, CAST Size in Inches Working Load Limit in Pounds Bolt Diameter in Inches Approx. Weight Each in Pounds 3/8 1,000 7/16 0.45 1/2 1,990 5/8 0.93 5/8 3,050 3/4 1.81 3/4 4,475 7/8 2.75 7/8 6,000 1 4.20 TYPE 304 or 316, cast. Dimensions are the same as galvanized Bolt Type Anchor Shackles above. GALVANIZED BOLT TYPE ANCHOR SHACKLES Size in Inches (A) Working Load Limit in Tons Bolt Ø in Inches (B) Length Inside in Inches (C) Width Between Eyes in Inches (D) Dimensions in Inches Appx. Weight Each in Pounds Nominal Tolerance E F 1/2 2 5/8 1.7/8 13/16 ± 1/16 1.3/8 1.3/16 0.9 5/8 3.1/4 3/4 2.3/8 1.1/16 ± 1/16 1.7/8 1.1/2 1.6 3/4 4.3/4 7/8 2.13/16 1.1/4 ± 1/16 2.1/8 1.3/4 2.8 7/8 6.1/2 1 3.5/16 1.7/16 ± 1/16 2.3/8 2 4.2 1 8.1/2 1.1/8 3.3/4 1.11/16 ± 1/8 2.5/8 2.5/16 6.4 1.1/8 9.1/2 1.1/4 4.1/4 1.13/16 ± 1/8 2.7/8 2.5/8 8.3 1.1/4 12 1.3/8 4.11/16 2.1/32 ± 1/8 3.1/4 2.7/8 11.7 1.3/8 13.1/2 1.1/2 5.1/4 2.1/4 ± 1/8 3.1/2 3.1/4 15.6 1.1/2 17 1.5/8 5.3/4 2.3/8 ± 1/8 3.3/4 3.3/8 19.7 1.3/4 25 2 7 2.7/8 ± 3/16 4.1/2 4.1/2 32.6 2 35 2.1/4 7.3/4 3.1/4 ± 3/16 5.1/4 5.1/4 48.3 2.1/2 55 2.3/4 10.1/2 4.1/8 ± 1/4 6.1/4 6.3/4 94.0 3 85 3.1/4 13 5 ± 1/4 6.3/4 7.3/8 145.0 3.1/2 120 3.3/4 15 5.1/2 ± 1/4 8.1/2 9 250.0 * The YELLOW shackle bolt is the Federally Registered Trademark of Kulkoni, Inc. ** Minimum Width Between Eyes as defined by Federal Specification RR-C-271, current revision. Meets the performance requirements of Federal Specification RR-C-271, current revision, Type IV A, Class 3, Grade A. Hot galvanized, forged carbon steel, heat treated, with alloy bolts, permanently marked with size and Working Load Limit. Sizes 1/2" through 3" are also available in DOMESTIC. * U.S. Registered Trademark No. 2,011,393 SHACKLES Read important warnings and information on pages 2 - 9 and page 33.