Kulkoni, Inc. 1-800-231-2357

Kulkoni, Inc. v921 WARNING: NEVER EXCEED WORKING LOAD LIMIT Page 52 Improper use and installation of cast malleable wire rope clips can result in serious injury or death. NEVER use cast malleable wire rope clips for lifting or suspending ANY load. Cast malleable wire rope clips are to be used only for non-critical, light duty applications with small applied loads. For complete installation instructions refer to page 48. ZINC PLATED , MALLEABLE Size in Inches Min. Clips Required Wire Rope Turn Back in Inches Torque in Foot Pounds* Approx. Wt. in Pounds Dimensions in Inches A B C D E F G 1/16** 3 4 2.0 0.030 0.15 0.65 0.45 0.38 0.38 0.45 0.69 1/8** 3 4.3/4 3.0 0.040 0.18 0.81 0.50 0.50 0.50 0.56 0.94 3/16 3 5.1/2 4.5 0.063 0.25 0.94 0.56 0.56 0.56 0.63 1.06 1/4 3 7 15.0 0.130 0.31 1.19 0.75 0.75 0.69 0.75 1.31 5/16 3 7.3/4 15.0 0.150 0.31 1.31 0.84 0.75 0.75 0.75 1.44 3/8 3 9.1/2 30.0 0.210 0.38 1.63 1.00 0.88 0.84 0.88 1.63 7/16 4 10.1/4 40.0 0.370 0.38 2. 00 1.19 1.06 1.00 1.06 1. 88 1/2 4 15.1/4 45.0 0.370 0.44 2. 00 1.19 1.06 1.00 1.06 1. 88 9/16 4 16 50.0 0.590 0.50 2.31 1.38 1.25 1.25 1.28 2.09 5/8 4 16 75.0 0.590 0.50 2.31 1.38 1.25 1.25 1.28 2.09 3/4 5 22.1/4 75.0 0.840 0.56 2.56 1.56 1.31 1.44 1.56 2.38 7/8 5 23.1/2 130.0 1.250 0.63 3.06 1.81 1.63 1.75 1.81 2.88 1 6 31 130.0 1.660 0.63 3.44 2 .00 1.88 2.06 2.00 3.00 1.1/8 7 39 200.0 2.430 0.75 4.00 2.75 2.00 2.19 2.06 3.38 Meets the performance requirements of Federal Specification FF-C-450, current revision, Type 1, Class 2. ** * Based on clean, unlubricated threads. The table above shows the minimum torque required to reach maximum holding power of wire rope clips. ** NOTE: 1/16" and 1/8" are not covered by Federal Specification FF-C-450, current revision. MALLEABLE WIRE ROPE CLIPS Read important warnings and information on pages 2 - 9 and page 48.