Kulkoni, Inc. 1-800-231-2357

Kulkoni, Inc. v921 WARNING: NEVER EXCEED WORKING LOAD LIMIT Page 30 CHAIN - STAINLESS STEEL CHAIN STAINLESS STEEL CHAIN Nominal Size mm Nominal Size Inches Working Load Limit in Pounds* Feet per Drum Minimum Weight per Foot in Pounds Max. Length per 100 Links in Inches 4.0 1/8 500 1,000 0.17 88.8 5.0 3/16 930 1,000 0.38 96.4 7.0 1/4 1,570 800 0.61 124.0 8.0 5/16 2,400 550 0.84 129.1 10.0 3/8 3,550 400 1.40 137.8 *AT ROOM TEMPERATURE CHAIN - ALLOY STEEL CHAIN, GRADE 100 CHAIN SLINGS Only chain rated Grade 80 or higher can be used for chain slings for overhead lifting. Refer to OSHA standard 1910.184, ASME standard B30.9 and ASTM A906 specification for design factors and other important information. Other standards and information may apply. Refer to page 4 for a discussion of chain slings. ALLOY CHAIN (GRADE 100) - IMPORTED and DOMESTIC According to ASTM A973 and NACM Welded Steel Chain Specification. Trade Size mm Trade Size Inches Working Load Limit in Pounds* Minimum Weight per foot in Pounds Max. Length per 100 Links in Inches 7 9/32 4,300 0.71 88 8 5/16 5,700 0.92 96 10 3/8 8,800 1.44 126 13 1/2 15,000 2.36 164 16 5/8 22,600 3.76 202 20 3/4 35,300 5.50 252 22 7/8 42,700 7.12 277 26 1** 59,700 9.65 293 32 1.1/4 G80 72,300 15.75 375 Refer to pages 36 - 39 for Grade 100 Alloy fittings. Chain is 100% proof tested to 2x the Working Load Limit. * Working Load Limit is based on single leg Grade 100 alloy sling, when utilizing Grade 100 attachments. ** Not covered by ASTM A973 or NACM Welded Steel Chain Specification. Read important warnings and information on pages 2 - 9 and page 27. DO NOT USE FOR OVERHEAD LIFTING