Kulkoni, Inc. 1-800-231-2357

Page 15 Kulkoni, Inc. v921 WARNING: NEVER EXCEED WORKING LOAD LIMIT These wire ropes are specially designed for use when rotation must be kept to a minimum. Strict adherence to breaking-in procedures and proper handling during use are extremely important with these ropes. Refer to the sources listed on page 97 for important information on rotation resistant wire ropes. ** Breaking Strengths shown are for Bright rope - Stainless Steel 19X7 Rotation Resistant ropes are not covered by the above specifications. Breaking Strengths will vary. 19 x 7 ROTATION RESISTANT Diameter in Inches Approx. Weight per Foot in Pounds Breaking Strength in Tons*/** 3/16 ‡ 0.065 1.56 1/4 † / †† 0.113 2.77 5/16 † 0.177 4.30 3/8 † / †† 0.250 6.15 7/16 †† 0.350 8.33 1/2 † / †† 0.450 10.80 9/16 †† 0.580 13.60 5/8 †† 0.710 16.80 3/4 †† 1.020 24.00 7/8 1.390 32.50 1 1.820 42.20 1.1/8 2.300 53.10 1.1/4 2.850 65.10 Sizes 1/2" and up meet the performance requirements of API-9A (18x7-WSC). All sizes listed meet the requirements of A.S.T.M. A 1023/ A1023M, where applicable. WSC, EIPS. ‡ Available in Galvanized only. † Available in Type 304 Stainless Steel.** †† Available in Galvanized. 19 x 7 ROTATION RESISTANT WITH WIRE STRAND CORE ROTATION AND SPIN RESISTANT WIRE ROPE Read important warnings and information on pages 2 - 9. 8 x 25 SPIN RESISTANT WITH IWRC 8 x 25 SPIN RESISTANT Diameter in Inches Approx. Weight per Foot in Pounds Breaking Strength in Tons* 3/8 0.26 6.63 7/16 0.36 8.97 1/2 0.47 11.60 9/16 0.60 14.70 5/8 0.73 18.10 3/4 1.06 25.90 7/8 1.44 35.00 1 1.88 45.50 1.1/8 2.39 57.30 According to A.S.T.M. A1023/1023M Wire Rope for General Purposes and Federal Specification RR-W-410, current revi- sion, as applicable. Meets the performance requirements of API-9A. Preformed, right regular lay. 3 x 46 ROTATION RESISTANT - GALVANIZED Diameter in Inches Approx. Weight per Foot in Pounds Breaking Strength in Tons* 7/8 1.16 42.6 1 1.49 55.0 * Listed for comparison only. Actual operating loads should never exceed the recommended design factor or 20% of cat- alog Breaking Strength. 3 x 46 ROTATION RESISTANT GALVANIZED