Kulkoni, Inc. 1-800-231-2357

Kulkoni, Inc. v921 WARNING: NEVER EXCEED WORKING LOAD LIMIT Page 14 METRIC WIRE ROPES Diameter in mm Approx. Weight per Foot in Pounds Breaking Strength in KN* Breaking Strength in Tons* 7 0.14 37.7 4.24 8 0.18 49.2 5.53 9 0.23 62.3 7.00 10 0.29 76.9 8.64 11 0.35 93.0 10.45 12 0.41 111.0 12.48 13 0.48 130.0 14.61 14 0.56 151.0 16.97 15** 0.64 170.0 19.11 16 0.73 197.0 22.14 18 0.93 249.0 27.99 20 1.15 308.0 34.62 22 1.39 372.0 41.81 24 1.65 443.0 49.80 26 1.76 520.0 58.45 6x36 (WS) IWRC, bright, RRL, Grade 2160 N/mm2 meets the breaking strength requirements of A.S.T.M. A 1023/A 1023M Wire Rope for General Purposes. LRL available in most sizes. ** Not included in A.S.T.M. A 1023/A 1023M. CABLE-LAID WIRE ROPE Diameter in Inches Construction Metallic Area in Square Inches Approx. Wt. per Foot in Pounds Breaking Strength in Tons* 3/8 7 x 7 x 7 0.062 0.22 7.15 1/2 7 x 7 x 7 0.099 0.37 11.70 5/8 7 x 7 x 7 0.159 0.60 18.50 3/4 7 x 7 x 19 0.217 0.81 24.30 7/8 7 x 7 x 19 0.281 1.05 31.10 1 7 x 7 x 19 0.372 1.38 39.20 1.1/8 7 x 7 x 19 0.455 1.72 47.40 1.1/4 7 x 7 x 19 0.584 2.18 65.00 1.1/2 7 x 7 x 19 0.794 2.96 88.70 Galvanized, preformed TO BE USED FOR MECHANICALLY SWAGED SLINGS ONLY. Do not use for hand-spliced assemblies or for general purpose operating rope. 6 x 36 WARRINGTON SEALE WITH IWRC 7 x 7 x 7 CABLE-LAID 7 x 7 x 19 CABLE-LAID * Listed for comparison only. Actual operating loads should never exceed the recommended design factor or 20% of cat- alog Breaking Strength. METRIC AND CABLE-LAID WIRE ROPE Read important warnings and information on pages 2 - 9.