Kulkoni, Inc. 1-800-231-2357

P R O D U C T S P R O D U C T S Wire Rope Clips All AQUALLINE Wire Rope Clips (WRC) are forged and meet the performance requirements of the EN 13411-5 norm (Type B / Grip 2). They are suitable for the fastening and securing of static loads but should never be used for lifting applications. Select the AQUALLINE Wire Rope Clip with the correct dimension for the required wire rope size. In case of intermediate nominal diameters of rope, always use the next larger size AQUALLINE Wire Rope Clip. The clips must be installed correctly and must be tightened to the correct torque value by using a torque Download the product datasheet from the GRF website at www.globalropefittings.com, or request by email at sales@kulkoni.com for more detailed information. wrench. • The bridge of the Wire Rope Clip should always be placed on the load bearing part of the rope, except when used on an AQUALLINE ITC-Wedge or when securing a dead end of a rope for a wedge socket. • The U-bolt must be placed on the rope tail (dead-end). • Clips can be installed. For more detailed information on the required number of clips we refer to the EN 13411-5 norm (Table B.2.). • For the correct torque values, see our product datasheet, which can be downloaded from the GRF website at www.globalropefittings.com, or can be requested by email at sales@kulkoni.com . • operation with a maximum of 1.25 times the Working Load Limit (WLL). Then check the torque value www.kulkoni.com | 1-800-231-2357 More detailed information is specified in the product datasheet, which can be downloaded from the GRF website at www.globalropefittings.com, or can be requested by email at sales@kulkoni.com . A Q U A L L I N E P R O D U C T S 22