Kulkoni, Inc. 1-800-231-2357

P R O D U C T S P R O D U C T S Wedge Sockets strength of the wire rope. They meet and exceed the performance requirements of the EN 13411-6 norm. All AQUALLINE Wedge Sockets are made from high-quality cast steel and are suitable for low temperature environments. The minimum operating temperature for general applications is -46°C. The material has an impact value of 50J at -20°C Charpy-V. Make sure to select the correct AQUALLINE Wedge Socket for the required wire rope size. This intermediate rope sizes, always choose the next larger size AQUALLINE Wedge Socket. Do not use a different wedge size in our AQUALLINE Wedge Socket than the size recommended for the required wire rope size. Never interchange AQUALLINE Wedge Sockets and AQUALLINE Wedges with other brands. Instructions for the use of the wedge sockets • The loaded wire rope should always be mounted in the centre line of the pin (see image of correct installation below). • Secure the dead end of the rope with a wire rope clip. Do not attach it to the loaded wire rope or to any other elements of the assembly. • The length of the dead end should be a minimum of 6x the wire rope diameter, but never less than 150 mm (6”) for standard 6-8 strand wire rope. For rotation-resistant wire rope, the dead end should be a minimum of 20x the wire rope diameter and not less than 150 mm (6”). • • possible. This should be done with care and no steel hammer should be used as to avoid damage to the rope. • slip if the wedge of the socket is not properly installed. CORRECT INCORRECT INCORRECT www.kulkoni.com | 1-800-231-2357 information is specified in the product datasheets, which can be downloaded from GRF website at www.globalropefittings.com, or can be requested by email at sales@kulkoni.com . In case of A Q U A L L I N E P R O D U C T S 20